24×7 Support: (877) 881-2235 | Support
Shopping Cart | Student Login

Illinois OSHA Training Online Courses

  • OSHA Accepted - Illinois Online Training Provider
  • Illinois OSHA 10-hour & 30-hour Training
  • Construction & General Industry Training
  • 24×7 Customer Support - Money Back Guarantee

OSHA 10hr & 30hr Training in Illinois

Illinois OSHA 10-hour & 30-hour Training Requirements

In Illinois, some companies require their employees to take OSHA training in order to be qualified to perform certain duties. However, whatever industry you work for in Illinois - taking an OSHA Training Course is a low cost investment that rewards you with essential job safety practices that could one day possibly save your life. Most workplace accidents and injuries are preventable, so take a proactive step towards your workplace safety.

Illinois OSHA 10-hour & 30-hour Training Courses

  • 10 hour
    Construction
  • 30 hour
    Construction
  • 10 hour
    Gen Industry
  • 30 hour
    Gen Industry
OSHA 10-hour Training - Construction

Description: The OSHA Outreach 10 Hour Training Course provides instruction on OSHA regulations and requirements as they apply to 29 CFR 1926 (Construction). This course provides an entry level construction worker with a general awareness to recognizing and preventing hazards on a construction site.

Audience: All Construction Industry Employees: Workers, Foremen, Job Supervisors, Site Inspectors, Workers on publicly-funded projects.

Hours: 10 hours

Learning Objectives

  • Recognize the aspects of 1926 Subpart C.
  • State the purpose of the OSH Act and list the functions of OSHA.
  • Explain the importance of OSHA in providing a safe and healthful workplace to workers covered by OSHA.
  • List the OSHA inspection priorities and describe the inspection process.

Course Outline

  • Orientation
  • Module 1: Introduction to OSHA and the OSH Act
  • Module 2: General safety and Health Provisions (OSHA 1926 Subpart C)
  • Module 3A: Health Hazards: Hazard Communication (29 CFR 1910.1200)
  • Module 3B: Health Hazards: Hazardous Materials (OSHA 1926 Subpart D)
  • Module 4: Cranes and Rigging (OSHA 1926 Subpart CC)
  • Module 5: Focus Four: Electrical Safety (OSHA 1926 Subpart K)
  • Module 6: Struck-By and Caught in Between
  • Module 7: Fall Protection (OSHA 1926 Subpart M)
  • Module 8: Personal Protective Equipment (OSHA 1926 Subpart E)
  • Module 9: Hand and Power Tools (OSHA 1926 Subpart I)
  • Module 10: Scaffolds (OSHA 1926 Subpart L)
  • Module 11: Stairways and Ladders (OSHA 1926 Subpart X)
  • Final Exam
OSHA Quizzes, Exam & Course Completion

Module Quizzes
At the end of each module, you will be given a 10 question module quiz. You must score at least 70% on each module quiz to move forward in the course.

You will be given up to three tries to pass each module quiz. Failure to successfully pass a quiz will result in being locked out of the course and not allowed to continue.

Final Exam
Once you have successfully completed all of the modules, you must pass a final exam to receive full credit for the course. The exam is 20 questions long and will test your knowledge on information covered throughout the course. You must make a score of at least 70% to pass this exam and complete the course.

You will be given up to three opportunities to pass the final exam. If you do not pass after three tries, you will be locked out of this course will no longer be able to take the course.

Course Completion
Upon successful completion of this course, a temporary printable certificate will be made available. Passing participants will receive a OSHA/DOL Outreach Construction Card within 4-6 weeks.*

Upon enrollment in the OSHA 10-hour Construction Outreach Training course, you will have 6 months from the time you start to complete it - in order to receive credit. After 6 months, your account will expire and you will be required to purchase the course again.

*Note: In order to receive your OSHA/DOL Construction wallet card, you must complete the survey at the end of the course.

Free OSHA HAZCom & GHS Supplemental Course

A free Hazard Communication Standard (HazCom) and Globally Harmonized System of Chemical Classification and Labeling (GHS) course is included with registration of any OSHA Outreach course. The revised Hazard Communication Standard (29 CFR 1910.1200) took effect May 25, 2012 and OSHA requires training regarding chemical hazards in the workplace. OSHA states employees throughout the U.S. needed to have completed GHS-HAZCom training by December 1, 2013 to be in compliance with new GHS standards.

In this course, you will learn about the HazCom (Hazardous Communication) Standard and the new Globally Harmonized System (GHS), and how to use Safety Data Sheets (SDSs) and chemical labels to protect yourself from hazards or react to chemical exposures.

Free OSHA Study Guide (PDF)

Course also includes a free OSHA 10 Hour Construction Industry Study Guide! This PDF Study Guide will assist you to pass the final exam and receive your DOL wallet card. This guide is a great supplement to the OSHA 10 Hour Construction Industry Outreach Course and can help as a great quick reference guide for the future.

Note: The 10 Hour Construction Outreach course is NOT equivalent to the OSHA 510 or 511 courses and will not meet the course prerequisites to take the OSHA 500 or 501 courses.

You will also find supplementary materials available for download by clicking the "Materials" tab on the menu located within the course player.

Other OSHA reference materials are available from the OSHA website - please visit: http://www.osha.gov/dte/outreach/

OSHA 30-hour Training - Construction

Description: The OSHA Outreach 30 Hour Training Course provides extensive instruction on OSHA regulations and requirements as they apply to 29 CFR 1926 (Construction). This course provides a comprehensive safety program specifically designed for safety directors, foremen, and field supervisors; the program provides complete information on OSHA compliance issues.

Audience: All Construction Industry Employees: Workers, Foremen, Job Supervisors, Superintendents, Project Managers, Safety Coordinators, or Safety Specialists, Site Inspectors, Workers on publicly-funded projects.

Hours: 30 hours

Course Outline

  • Orientation
  • Module 1: Introduction to OSHA and the OSH Act
  • Module 2: Recordkeeping
  • Module 3A: Basic Safety Orientation
  • Module 3B: General Safety and Health Provisions (OSHA 1926 Subpart C)
  • Module 4: Health Hazards: Hazard Communication (29 CFR 1910.1200)
  • Module 5: Health Hazards: Hazardous Materials (OSHA 1926 Subpart D)
  • Module 6: Process Safety Management (29 CFR 1910.119)
  • Module 7: Personal Protective Equipment (OSHA 1926 Subpart E)
  • Module 8: Fire Protection (OSHA 1926 Subpart F)
  • Module 9: Materials Handling and Storage (OSHA 1926 Subpart H)
  • Module 10: Hand and Power Tools (OSHA 1926 Subpart I)
  • Module 11: Welding and Cutting (OSHA 1926 Subpart J)
  • Module 12: Focus Four - Electrical Safety (OSHA 1926 Subpart K)
  • Module 13: Focus Four - Struck-By and Caught in Between Hazards
  • Module 14: Focus Four - Fall Protection (OSHA 1926 Subpart M)
  • Module 15: Cranes and Rigging (OSHA 1926 Subpart CC)
  • Module 16: Motor Vehicles (OSHA 1926 Subpart O)
  • Module 17: Excavations (OSHA 1926 Subpart P)
  • Module 18: Concrete and Masonry Construction (OSHA 1926 Subpart Q)
  • Module 19: Stairways and Ladders (OSHA 1926 Subpart X)
  • Module 20: Confined Spaces (OSHA 1926 Subpart AA)
  • Module 21: Lead Safety in the Workplace (OSHA 1926.62 Subpart D)
  • Module 22: Use of Explosives in the Workplace (OSHA 1926 Subpart U)
  • Module 23: Scaffolds (OSHA 1926 Subpart L)
  • Final Exam
OSHA Quizzes, Exam & Course Completion

Module Quizzes
At the end of each module, you will be given a 10 question module quiz. You must score at least 70% on each module quiz to move forward in the course.

You will be given up to three tries to pass each module quiz. Failure to successfully pass a quiz will result in being locked out of the course and not allowed to continue.

Final Exam
Once you have successfully completed all of the modules, you must pass a final exam to receive full credit for the course. The exam will test your knowledge on information covered throughout the course. You must make a score of at least 70% to pass this exam and complete the course.

You will be given up to three opportunities to pass the final exam. If you do not pass after three tries, you will be locked out of this course will no longer be able to take the course.

Course Completion
Upon successful completion of this course, a temporary printable certificate will be made available. Passing participants will receive a OSHA/DOL Outreach Card within 4-6 weeks.*

Upon enrollment in the OSHA 30-hour Outreach Training course, you will have 6 months from the time you start to complete it - in order to receive credit. After 6 months, your account will expire and you will be required to purchase the course again.

*Note: In order to receive your OSHA/DOL Construction wallet card, you must complete the survey at the end of the course.

Free OSHA HAZCom & GHS Supplemental Course

A free Hazard Communication Standard (HazCom) and Globally Harmonized System of Chemical Classification and Labeling (GHS) course is included with registration of any OSHA Outreach course. The revised Hazard Communication Standard (29 CFR 1910.1200) took effect May 25, 2012 and OSHA requires training regarding chemical hazards in the workplace. OSHA states employees throughout the U.S. needed to have completed GHS-HAZCom training by December 1, 2013 to be in compliance with new GHS standards.

In this course, you will learn about the HazCom (Hazardous Communication) Standard and the new Globally Harmonized System (GHS), and how to use Safety Data Sheets (SDSs) and chemical labels to protect yourself from hazards or react to chemical exposures.

Free OSHA Study Guide (PDF)

Course also includes a free OSHA 30 Hour Construction Industry Study Guide! This PDF Study Guide will assist you to pass the final exam and receive your DOL wallet card. This guide is a great supplement to the OSHA 30 Hour Construction Industry Outreach Course and can help as a great quick reference guide for the future.

You will also find supplementary materials available for download by clicking the "Materials" tab on the menu located within the course player.

Other OSHA reference materials are available from the OSHA website - please visit: http://www.osha.gov/dte/outreach/

OSHA 10-hour Training - General Industry

Description: The OSHA Outreach 10 Hour Training Course provides instruction on OSHA regulations and requirements as they apply to 29 CFR 1910 (General Industry). This course provides an entry level worker with a general awareness to recognizing and preventing hazards on the job site.

Audience:

  • Entry Level General Industry Workers
  • Industries include but not limited to: Health Care, Manufacturing, Warehousing, Distribution, and Retail Industries employees.

Hours: 10 hours

Learning Objectives

  • Understanding the OSH Act, the functions and resources of OSHA.
  • Becoming aware of the OSHA inspection priorities and describing the inspection process.
  • Knowing the rights and responsibilities of employers and employees under the OSH Act.
  • Learning the major hazards associated with general industry work and how to avoid, protect, or control them. This includes:
    • Slips, trips, falls associated with walking and working surfaces
    • Effective Egress and fire protection program
    • Outline the general requirements for general safety standards
    • Flammable and combustible liquids and gasses
    • Hazards of chemicals
    • Electrical hazards
  • Understanding the value of personal protective equipment, usage and limitations.
  • Learning the basic elements of a safety and health program.

Course Outline

  • Orientation
  • Module 1: Introduction to OSHA and the OSH Act
  • Module 2: Walking & Working Surfaces (OSHA 1910 Subpart D)
  • Module 3: Emergency Action Plan (OSHA 1910 Subpart E)
  • Module 4: Hazardous Materials (OSHA 1910 Subpart H)
  • Module 5: Personal Protective Equipment (OSHA 1910 Subpart I)
  • Module 6: Machine Guarding Safety (OSHA 1910 Subpart O)
  • Module 7: Electrical Safety (OSHA 1910 Subpart S)
  • Module 8: Hazard Communication (OSHA 1910.1200)
  • Module 9: Hazardous Substances & Industrial Hygiene (OSHA 1910 Subpart Z)
  • Module 10: Safety and Health Programs
  • Final Exam
OSHA Quizzes, Exam & Course Completion

Module Quizzes
At the end of each module, you will be given a 10 question module quiz. You must score at least 70% on each module quiz to move forward in the course.

You will be given up to three tries to pass each module quiz. Failure to successfully pass a quiz will result in being locked out of the course and not allowed to continue.

Final Exam
Once you have successfully completed all of the modules, you must pass a final exam to receive full credit for the course. The exam is 20 questions long and will test your knowledge on information covered throughout the course. You must make a score of at least 70% to pass this exam and complete the course.

You will be given up to three opportunities to pass the final exam. If you do not pass after three tries, you will be locked out of this course will no longer be able to take the course.

Course Completion
Upon successful completion of this course, a temporary printable certificate will be made available. Passing participants will receive a OSHA/DOL Outreach Construction Card within 4-6 weeks.*

Upon enrollment in the OSHA 10-hour Construction Outreach Training course, you will have 6 months from the time you start to complete it - in order to receive credit. After 6 months, your account will expire and you will be required to purchase the course again.

*Note: In order to receive your OSHA/DOL Construction wallet card, you must complete the survey at the end of the course.

Free OSHA HAZCom & GHS Supplemental Course

A free Hazard Communication Standard (HazCom) and Globally Harmonized System of Chemical Classification and Labeling (GHS) course is included with registration of any OSHA Outreach course. The revised Hazard Communication Standard (29 CFR 1910.1200) took effect May 25, 2012 and OSHA requires training regarding chemical hazards in the workplace. OSHA states employees throughout the U.S. needed to have completed GHS-HAZCom training by December 1, 2013 to be in compliance with new GHS standards.

In this course, you will learn about the HazCom (Hazardous Communication) Standard and the new Globally Harmonized System (GHS), and how to use Safety Data Sheets (SDSs) and chemical labels to protect yourself from hazards or react to chemical exposures.

Free OSHA Study Guide (PDF)

Course also includes a free OSHA 10 Hour Construction Industry Study Guide! This PDF Study Guide will assist you to pass the final exam and receive your DOL wallet card. This guide is a great supplement to the OSHA 10 Hour Construction Industry Outreach Course and can help as a great quick reference guide for the future.

Note: The 10 Hour Construction Outreach course is NOT equivalent to the OSHA 510 or 511 courses and will not meet the course prerequisites to take the OSHA 500 or 501 courses.

You will also find supplementary materials available for download by clicking the "Materials" tab on the menu located within the course player.

Other OSHA reference materials are available from the OSHA website - please visit: http://www.osha.gov/dte/outreach/

OSHA 30-hour Training - General Industry

Description: The OSHA Outreach 30 Hour Training Course provides instruction on OSHA regulations and requirements as they apply to 29 CFR 1910 (General Industry). This course provides an entry level worker with a general awareness to recognizing and preventing hazards on the job site.

Audience:

  • Foremen, Superintendents, Project Managers, Safety Coordinators, or Safety Specialists
  • Industries include but not limited to: Health Care, Manufacturing, Warehousing, Distribution, and Retail Industries employees

Hours: 30 hours

Course Outline

  • Orientation
  • Module 1A: Introduction to OSHA and the OSH Act
  • Module 1B: Basic Safety Orientation
  • Module 2: Walking & Working Surfaces (29 CFR 1910 Subpart D)
  • Module 3: Emergency Action Plan (29 CFR 1910 Subpart E)
  • Module 4: Hazardous Materials (29 CFR 1910 Subpart H)
  • Module 5: Hazwoper
  • Module 6: Personal Protective Equipment (29 CFR 1910 Subpart I)
  • Module 7: Confined Spaces & Permit Required Confined Spaces
  • Module 8: Lockout/Tagout (29 CFR 1910.147)
  • Module 9: Materials Handling & Storage (29 CFR 1904)
  • Module 10: Machine Guarding Safety (29 CFR 1910 Subpart O)
  • Module 11: Welding, Cutting, and Brazing
  • Module 12: Electrical Safety (29 CFR 1910 Subpart S)
  • Module 13: Hazard Communication (29 CFR 1910.1200)
  • Module 14: Hazardous Substances & Industrial Hygiene (29 CFR 1910 Subpart Z)
  • Module 15: Bloodborne Pathogens (29 CFR 1910.1030)
  • Module 16: Record Keeping & Reporting (29 CFR 1904)
  • Module 17: Workplace Violence
  • Module 18: Safety and Health Programs
  • Module 19: Ergonomics
  • Module 20: Hazards of Asbestos in the Workplace (29 CFR 1910.1001)
  • Module 21: Lead Safety in the Workplace (29 CFR 1910.1025)
  • Module 22: Ionizing and Non-Ionizing Radiation Safety
  • Module 23: Formaldehyde Awareness (29 CFR 1910.1048)
  • Module 24: Process Safety Management of Highly Hazard Materials
  • Final Exam
OSHA Quizzes, Exam & Course Completion

Module Quizzes
At the end of each module, you will be given a 10 question module quiz. You must score at least 70% on each module quiz to move forward in the course.

You will be given up to three tries to pass each module quiz. Failure to successfully pass a quiz will result in being locked out of the course and not allowed to continue.

Final Exam
Once you have successfully completed all of the modules, you must pass a final exam to receive full credit for the course. The exam will test your knowledge on information covered throughout the course. You must make a score of at least 70% to pass this exam and complete the course.

You will be given up to three opportunities to pass the final exam. If you do not pass after three tries, you will be locked out of this course will no longer be able to take the course.

Course Completion
Upon successful completion of this course, a temporary printable certificate will be made available. Passing participants will receive a OSHA/DOL Outreach Card within 4-6 weeks.*

Upon enrollment in the OSHA 30-hour Outreach Training course, you will have 6 months from the time you start to complete it - in order to receive credit. After 6 months, your account will expire and you will be required to purchase the course again.

*Note: In order to receive your OSHA/DOL Construction wallet card, you must complete the survey at the end of the course.

Free OSHA HAZCom & GHS Supplemental Course

A free Hazard Communication Standard (HazCom) and Globally Harmonized System of Chemical Classification and Labeling (GHS) course is included with registration of any OSHA Outreach course. The revised Hazard Communication Standard (29 CFR 1910.1200) took effect May 25, 2012 and OSHA requires training regarding chemical hazards in the workplace. OSHA states employees throughout the U.S. needed to have completed GHS-HAZCom training by December 1, 2013 to be in compliance with new GHS standards.

In this course, you will learn about the HazCom (Hazardous Communication) Standard and the new Globally Harmonized System (GHS), and how to use Safety Data Sheets (SDSs) and chemical labels to protect yourself from hazards or react to chemical exposures.

Free OSHA Study Guide (PDF)

Course also includes a free OSHA 30 Hour General Industry Study Guide! This PDF Study Guide will assist you to pass the final exam and receive your DOL wallet card. This guide is a great supplement to the OSHA 30 Hour General Industry Outreach Course and can help as a great quick reference guide for the future.

You will also find supplementary materials available for download by clicking the "Materials" tab on the menu located within the course player.

Other OSHA reference materials are available from the OSHA website - please visit: http://www.osha.gov/dte/outreach/


Illinois Occupational Safety - OSHA Training

The Illinois Department of Labor (IDOL) promotes and protect the rights, wages, welfare, working conditions, safety and health of Illinois workers through enforcement of state labor laws, to safeguard the public through regulation of amusement rides and to ensure compliance with all other labor standards.

The Illinois Department of Public Health (IDHP) promotes the health of the people of Illinois through the prevention and control of disease and injury.

The purpose of the Illinois Census of Fatal Occupational Injuries (CFOI) monitors, with verification, all fatal work injuries by collecting information on the circumstances of each fatality and on the characteristics of each decedent. The data compiled by the CFOI program are published each year and contain information on the workers involved and the event surrounding each fatality.

Illinois Labor Safety State Agency - OSHA Training

Illinois Department of Public Health
Division of Epidemiologic Studies
535 West Jefferson Street, 3rd Floor
Springfield, IL 62761
Phone: 217-785-7130
Web: http://www.idph.state.il.us/about/epi/cfoirpt.htm

State Reporting:

OSHA Federal Safety Labor Data

The U.S. Bureau of Labor Statistics (BLS) - State Occupational Injuries, Illnesses, and Fatalities (IIF) Program - provides annual information on the rate and number of work-related injuries, illnesses, and fatal injuries, and how these statistics vary by incident, industry, geography, occupation, and other characteristics. This data is collected through two BLS programs:
  • SOII - BLS Survey of Occupational Injuries and Illnesses
    The SOII provides estimates for nonfatal cases of work-related injuries and illnesses from 46 States and Territories that are recorded by employers under the Occupational safety and Health Administration's (OSHA's) recordkeeping guidelines.
  • CFOI - BLS Census of Fatal Occupational Injuries
    The CFOI publishes data on fatal cases of work-related injuries for all States, Territories, and New York City.

For more information, check out the BLS State Occupational Injuries, Illnesses, and Fatalities - Labor Programs and State data.

Illinois OSHA Top Fatal and Nonfatal Injuries and Illnesses

According to latest data, the leading cause of workplace fatalities in Illinois was in the production, transportation, and material moving occupations (Source). The main type of these fatalities is the vehicle backover (i.e., when a vehicle backs up and strikes a worker behind the vehicle).

For more information on backovers, OSHA's Preventing Backovers webpage provides information about the hazards of backovers; solutions that can reduce the risk or frequency of these incidents; articles and resources; and references to existing regulations.

As with most states, the leading causes of private sector worker deaths (excluding highway collisions) in the construction industry were falls, followed by electrocution, struck by object, and caught-in/between.
Source: OSHA Common Statistics Summaries

Falls deaths are preventable by a safety training class that covers 29 CFR 1926.500 - Subpart M – Fall Protection and deals with both the human and equipment-related issues in protecting workers from fall hazards.
Sources: OSHA – Fall Protection in Construction (PDF); OSHA's Fall Prevention Campaign

Illinois Nonfatal Occupational Injuries and Illnesses Data by Industry (SOII)
(Please contact the State for additional data.)
- *2015  Incidence rates (PDF) Case counts (PDF)
- *2014  Incidence rates (PDF) Case counts (PDF)
- *2013  Incidence rates (PDF) Case counts (PDF)
- *2012  Incidence rates (PDF) Case counts (PDF)

Illinois Fatal Occupational Injuries (CFOI) Data
(Please contact the State for additional data.)
- 2015 Fatal injury counts (HTML) rates (HTML)
- 2014 Fatal injury counts (HTML) rates (HTML)
- 2013 Fatal injury counts (HTML) rates (PDF)
- 2012 Fatal injury counts (HTML) rates (PDF)

Illinois OSHA Online Training

OSHA 10-hour Training can help you comply with OSHA training standards so you can protect yourself or your employees from workplace injuries and death. Is your organization compliant with OSHA training standards? We can help you comply – and go beyond compliance – for the safety and well-being of your employees.

Disclaimer: The information presented on this website has been compiled from Federal and State sources and documents believed to be reliable and represent the best professional judgment of the OSHA 10hr Training. The accuracy of the information presented, however, is not guaranteed, nor is any responsibility assumed or implied, OSHA 10hr Training, and/or any other individual or entity, as applicable for any damage or loss resulting from inaccuracies or omissions. Contact state program staff directly to verify information.

About OSHA Outreach Training

Our OSHA Outreach training courses are accepted by OSHA and powered by 360training.com.
Outreach Trainer – Matt Luman - OSHAtrainer@360training.com

Matt Luman is our OSHA Instructor of Record at 360Training.com. He is an OSHA-authorized Outreach Trainer for General Industry and Construction, and a PEC Core Compliance Instructor for the Oil and Gas Industry. Matt has many years of experience across multiple industry sectors including petrochemical, water, and clean-up operations, working as a trainer and mentor. He also has created auditing programs, standard operating procedures, and training curriculum for major corporations.

Illinois OSHA Training

Illinois OSHA Training

Need OSHA Training in Illinois?

OSHA Accepted Training Provider

The OSHA Outreach 10 hour training course provides instruction on OSHA standards as required by 29 CFR 1926 (Construction) and by 29 CFR 1910 (General Industry).

  • OSHA Accepted Online Provider
  • Meets Latest OSHA Standards
  • Auto-bookmarking never lose place
  • Download certificate of completion
  • Powered by 360training.com
  • 100% Online, 24x7 Support
  • Money Back Guarantee

Construction OSHA Training

Illinois OSHA 10 Hour Training
Price: $89.00 Sale $79.00

Illinois OSHA 30 Hour Training
Price: $189.00 Sale $169.00


General Industry OSHA Training

Illinois OSHA 10 Hour Training
Price: $89.00 Sale $79.00

Illinois OSHA 30 Hour Training
Price: $189.00 Sale $169.00


OSHA Training 24×7 Customer Support
Search the knowledge base, submit a support ticket, troubleshoot issues, recover passwords, chat, e-mail or call the customer support desk. We look forward to helping you.

Find support for any course - click here.
Phone: (877) 881-2235


Save on OSHA Training Group Rates
Get huge discounts by enrolling and training all your employees. Enjoy tailored corporate solutions and training services - a free cloud-based LMS and even consulting services. Track progress, generate reports, and manage learners online.
More Info


No easier way to get OSHA training in Illinois!

 

OSHA Training Accepted Statewide
We offer online OSHA Training in Illinois for: Chicago, Aurora, Rockford, Joliet, Naperville, Springfield, Peoria, Elgin, Waukegan, Cicero, Champaign, Bloomington, Arlington Heights, Evanston, Decatur, Schaumburg, and many more!