Falls are among the most common causes of serious work related injuries and deaths. Employers must set up the work place to prevent employees from falling off of overhead platforms, elevated work stations or into holes in the floor and walls.
Fatalities caused by falls from elevation continue to be a leading cause of death for construction employees, accounting for 350 of the 937 construction fatalities recorded in 2015 (BLS data). Those deaths were preventable. The National Fall Prevention Stand-Down raises fall hazard awareness across the country in an effort to stop fall fatalities and injuries.
What is a Safety Stand-Down?
National Safety Stand-Down -To Prevent Falls in Construction (May 8-12, 2017)
A Safety Stand-Down is a voluntary event for employers to talk directly to employees about safety. Any workplace can hold a stand-down by taking a break to focus on “Fall Hazards” and reinforcing the importance of “Fall Prevention”. It’s an opportunity for employers to have a conversation with employees about hazards, protective methods, and the company’s safety policies and goals. It can also be an opportunity for employees to talk to management about fall hazards they see.
U.S. DOL – Falling Off Ladders Can Kill: Use Them Safely (Booklet)
What can be done to reduce falls?
Employers must set up the work place to prevent employees from falling off of overhead platforms, elevated work stations or into holes in the floor and walls. OSHA requires that fall protection be provided at elevations of four feet in general industry workplaces, five feet in shipyards, six feet in the construction industry and eight feet in longshoring operations. In addition, OSHA requires that fall protection be provided when working over dangerous equipment and machinery, regardless of the fall distance.
To prevent employees from being injured from falls, employers must:
- Guard every floor hole into which a worker can accidentally walk (using a railing and toe-board or a floor hole cover).
- Provide a guard rail and toe-board around every elevated open sided platform, floor or runway.
- Regardless of height, if a worker can fall into or onto dangerous machines or equipment (such as a vat of acid or a conveyor belt) employers must provide guardrails and toe-boards to prevent workers from falling and getting injured.
- Other means of fall protection that may be required on certain jobs include safety harness and line, safety nets, stair railings and hand rails.
OSHA requires employers to:
- Provide working conditions that are free of known dangers.
- Keep floors in work areas in a clean and, so far as possible, a dry condition.
- Select and provide required personal protective equipment at no cost to workers.
- Train workers about job hazards in a language that they can understand.
How do I find out about employer responsibilities and workers’ rights?
Workers have a right to a safe workplace. The law requires employers to provide their employees with safe and healthful workplaces. The OSHA law also prohibits employers from retaliating against employees for exercising their rights under the law (including the right to raise a health and safety concern or report an injury). For more information see www.whistleblowers.gov or Workers’ rights under the OSH Act.
OSHA can help answer questions or concerns from employers and workers. To reach your regional or area OSHA office, go to the OSHA Offices by State webpage or call 1-800-321-OSHA (6742).
Small business employers may contact OSHA’s free and confidential On-site Consultation program to help determine whether there are hazards at their worksites and work with OSHA on correcting any identified hazards. Consultants in this program from state agencies or universities work with employers to identify workplace hazards, provide advice on compliance with OSHA standards, and assist in establishing injury and illness prevention programs. On-site Consultation services are separate from enforcement activities and do not result in penalties or citations. To contact OSHA’s free consultation service, go to OSHA’s On-site Consultation web page or call 1-800-321-OSHA (6742) and press number 4.
Workers may file a complaint to have OSHA inspect their workplace if they believe that their employer is not following OSHA standards or that there are serious hazards. Workers can file a complaint with OSHA by calling 1-800-321-OSHA (6742), online via eComplaint Form, or by printing the complaint form and mailing or faxing it to the local OSHA area office. Complaints that are signed by a worker are more likely to result in an inspection.
If you think your job is unsafe or if you have questions, contact OSHA at 1-800-321-OSHA (6742). Your contact will be kept confidential. We can help. For other valuable worker protection information, such as Workers’ Rights, Employer Responsibilities, and other services OSHA offers, visit OSHA’s Workers’ page.